The bq25015/7 are highly integrated charge and power management devices targeted at space-limited bluetooth applications. The bq25015/7 devices offer integrated power FET and current sensor for charge control, reverse blocking protection, high accuracy current and voltage regulation, charge status, charge termination, and a highly efficient and low-power dc-dc converter in a small package.

The bq25015/7 devices charge the battery in three phases: conditioning, constant current and constant voltage. Charge is terminated based on minimum current. An internal charge timer provides a backup safety feature for charge termination. The bq25015/7 automatically re-starts the charge if the battery voltage falls below an internal threshold. The bq25015/7 automatically enters sleep mode when V_CC supply is removed.

The integrated low-power high-efficiency dc-dc converter is designed to operate directly from a single-cell Li-ion or Li-Pol battery pack. The output voltage is either adjustable from 0.7 V to VBAT, or fixed at 1.8 V (bq25017) and is capable of delivering up to 300-mA of load current. The dc-dc converter operates at a synchronized 1 MHz switching frequency allowing for the use of small inductors.

• Li-Ion Or Li-Pol Charge Management and Synchronous DC-DC Power Conversion In a Single Chip
• Charges and Powers the System from Either the AC Adapter or USB with Autonomous Power Source Selection
• Integrated USB Charge Control with Selectable 100 mA and 500 mA Charge Rates
• Integrated Power FET and Current Sensor for Up to 500 mA Charge Applications AND 300 mA DC-DC Controller with Integrated FETs
• Reverse Leakage Protection Prevents Battery Drainage
• Automatic Power Save Mode For High Efficiency at Low Current, or Forced PWM for Frequency Sensitive Applications
• APPLICATIONS
  • MP3 Players
  • PDAs, Smartphones
  • Digital Cameras

• Number of series cells
• 1
• Charge current (Max) (A)
• 0.5
• Operating Vin (Max) (V)
• 6.5
• Cell chemistry
• Li-Ion/Li-Polymer
• Battery charge voltage (Min) (V)
• 4.2
• Battery charge voltage (Max) (V)
• 4.2
• Absolute Vin (safety rating) (Max) ((V))
• 7
• Control interface
• Standalone (RC-Settable)
• Features
• Integrated buck converter
• Operating Vin (Min) (V)
• 4.5
• Rating
• Catalog

BQ25017的完整型号有：BQ25017RHLR，以下是这些产品的关键参数及官网采购报价：

BQ25017RHLR，工作温度：-40 to 125，封装：VQFN (RHL)-20，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网BQ25017RHLR的批量USD价格：1.408（1000+）