The BUF08832 offers eight programmable gamma channels and one programmable V_COM channel.

The final gamma and V_COM values can be stored in the on-chip, nonvolatile memory. To allow for programming errors or liquid crystal display (LCD) panel rework, the BUF08832 supports up to 16 write operations to the on-chip memory.

The BUF08832 has two separate memory banks, allowing simultaneous storage of two different gamma curves to facilitate switching between gamma curves.

All gamma and V_COM channels offer a rail-to-rail output that typically swings to within 150mV of either supply rail with a 10mA load. All channels are programmed using a Two-Wire interface that supports standard operations up to 400kHz and high-speed data transfers up to 3.4MHz.

The BUF08832 is manufactured using Texas Instruments’ proprietary, state-of-the-art, high-voltage CMOS process. This process offers very dense logic and high supply voltage operation of up to 20V. The BUF08832 is offered in a HTSSOP-20 PowerPAD package, and is specified from –40°C to +85°C.

• 10-BIT RESOLUTION
• 8-CHANNEL P-GAMMA
• 1-CHANNEL P-VCOM
• HIGH SLEW RATE VCOM: 45V/s
• 16x REWRITABLE NONVOLATILE MEMORY
• TWO INDEPENDENT PIN-SELECTABLE MEMORY BANKS
• RAIL-TO-RAIL OUTPUT
  • 300mV Min Swing-to-Rail (10mA)
  • > 300mA Max IOUT
• LOW SUPPLY CURRENT
• SUPPLY VOLTAGE: 9V to 20V
• DIGITAL SUPPLY: 2V to 5.5V
• TWO-WIRE INTERFACE: Supports 400kHz and 3.4MHz
• APPLICATIONS
  • TFT-LCD REFERENCE DRIVERS

All trademarks are the property of their respective owners.

• Display type
• LCD unipolar
• IC integration
• Gamma buffer, VCOM
• Vin (Min) (V)
• 9
• Vin (Max) (V)
• 20
• Source driver voltage (Min) (V)
• 9
• Source driver voltage (Max) (V)
• 20
• Level shifter/scan driver (ch)
• 0
• Features
• Gamma buffer, I2C interface, VCOM or op amp
• Rating
• Catalog

BUF08832的完整型号有：BUF08832AIPWPR，以下是这些产品的关键参数及官网采购报价：

BUF08832AIPWPR，工作温度：-40 to 95，封装：HTSSOP (PWP)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网BUF08832AIPWPR的批量USD价格：.95（1000+）

BUF08832EVM BUF08832 评估模块

BUF08832EVM 主要硬件由 2 块电路板、BUF08832 测试板和 USB DIG 平台组成。BUF08832 测试板包含 BUF08832、用于外部连接的端子台以及用于器件配置的多个跳线。USB DIG 平台包含一个具有内置 USB 接口的 8052 微处理器。此微处理器生成与 INA219 进行通信所需的 I2C 信号。USB DIG 平台还包含 3V/5V 可编程线性稳压器、电源控制开关、通用数字 I/O 和 SPI 接口。BUF08832EVM 包含 AC 墙上适配器（220/120Vac 至 6Vdc），可以为 USB DIG 平台提供 6V 直流电源。BUF08832 (...)

BUF08832EVM Source Code

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)