The ’HC4015 consists of two identical, independent, 4-stage serial-input/parallel-output registers. Each register has independent Clock (CP) and Reset (MR) inputs as well as a single serial Data input. "Q" outputs are available from each of the four stages on both registers. All register stages are D-type, master-slave flip-flops. The logic level present at the Data input is transferred into the first register stage and shifted over one stage at each positive- going clock transition. Resetting of all stages is accomplished by a high level on the reset line.

The device can drive up to 10 low power Schottky equivalent loads. The ’HC4015 is an enhanced version of equivalent CMOS types.

• Maximum Frequency, Typically 60MHz CL = 15pF, VCC = 5V, TA = 25°C
• Positive-Edge Clocking
• Overriding Reset
• Buffered Inputs and Outputs
• Fanout (Over Temperature Range)
  • Standard Outputs . . . . . 10 LSTTL Loads
  • Bus Driver Outputs . . . . . . 15 LSTTL Loads
• Wide Operating Temperature Range . . . 55°C to 125°C
• Balanced Propagation Delay and Transition Times
• Significant Power Reduction Compared to LSTTL Logic ICs
• HC Types
  • 2V to 6V Operation
  • High Noise Immunity: NIL = 30%, NIH = 30% of VCC at VCC = 5V

• Configuration
• Serial-in, Parallel-out
• Bits (#)
• 4
• Technology Family
• HC
• Supply voltage (Min) (V)
• 2
• Supply voltage (Max) (V)
• 6
• Input type
• Standard CMOS
• Output type
• Push-Pull
• Clock Frequency (MHz)
• 60
• IOL (Max) (mA)
• 5.2
• IOH (Max) (mA)
• -5.2
• ICC (Max) (uA)
• 160
• Features
• Balanced outputs, High speed (tpd 10-50ns), Positive input clamp diode

CD54HC4015的完整型号有：5962-8995301EA、CD54HC4015F3A，以下是这些产品的关键参数及官网采购报价：

5962-8995301EA，工作温度：-55 to 125，封装：CDIP (J)-16，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网5962-8995301EA的批量USD价格：17.544（1000+）

CD54HC4015F3A，工作温度：-55 to 125，封装：CDIP (J)-16，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网CD54HC4015F3A的批量USD价格：17.544（1000+）