The CDC2351 is a high-performance clock-driver circuit that distributes one input (A) to ten outputs (Y) with minimum skew for clock distribution. The output-enable (OE\) input disables the outputs to a high-impedance state. Each output has an internal series damping resistor to improve signal integrity at the load. The CDC2351 operates at nominal 3.3-V V_CC.

The propagation delays are adjusted at the factory using the P0 and P1 pins. The factory adjustments ensure that the part-to-part skew is minimized and is kept within a specified window. Pins P0 and P1 are not intended for customer use and should be connected to GND.

The CDC2351 is characterized for operation from 0°C to 70°C. The CDC2351Q is characterized for operation over the full automotive temperature range of -40°C to 125°C.

• Low Output Skew, Low Pulse Skew for Clock-Distribution and Clock-Generation Applications
• Operates at 3.3-V VCC
• LVTTL-Compatible Inputs and Outputs
• Supports Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC)
• Distributes One Clock Input to Ten Outputs
• Outputs Have Internal Series Damping Resistor to Reduce Transmission Line Effects
• Distributed VCC and Ground Pins Reduce Switching Noise
• State-of-the-Art EPIC-II BTM BiCMOS Design Significantly Reduces Power Dissipation
• Package Options Include Plastic Small-Outline (DW) and Shrink Small-Outline (DB) Packages
• Available in Q-Temp Automotive High Reliability Automotive Applications Configuration Control / Print Support Qualification to Automotive Standards

  EPIC-IIB is a trademark of Texas Instruments.

• Function
• Single-ended
• Output frequency (Max) (MHz)
• 100
• Number of outputs
• 10
• Output supply voltage (V)
• 3.3
• Core supply voltage (V)
• 3.3
• Output skew (ps)
• 500
• Features
• 1:10 fanout
• Operating temperature range (C)
• 0 to 70
• Rating
• Catalog
• Output type
• LVTTL
• Input type
• LVTTL

CDC2351的完整型号有：CDC2351DB、CDC2351DBR、CDC2351DW、CDC2351DWR，以下是这些产品的关键参数及官网采购报价：

CDC2351DB，工作温度：0 to 70，封装：SSOP (DB)-24，包装数量MPQ：60个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网CDC2351DB的批量USD价格：6.664（1000+）

CDC2351DBR，工作温度：0 to 70，封装：SSOP (DB)-24，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网CDC2351DBR的批量USD价格：5.745（1000+）

CDC2351DW，工作温度：0 to 70，封装：SOIC (DW)-24，包装数量MPQ：25个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网CDC2351DW的批量USD价格：6.664（1000+）

CDC2351DWR，工作温度：0 to 70，封装：SOIC (DW)-24，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网CDC2351DWR的批量USD价格：5.745（1000+）

PSPICE-FOR-TI 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)