The CDC421Axxx is a high-performance, low-phase-noise clock generator. It has an integrated low-noise, LC-based voltage-controlled oscillator (VCO) that operates within the 1.75 GHz to 2.35 GHz frequency range. It has an integrated crystal oscillator that operates in conjunction with an external AT-cut crystal to produce a stable frequency reference for a phase-locked loop (PLL)-based frequency synthesizer. The output frequency (f_OUT) is proportional to the frequency of the input crystal (f_XTAL).

The device operates in 3.3-V supply environment and is characterized for operation from -40°C to +85°C. The CDC421Axxx is available in a QFN-24 4-mm × 4-mm package.

The CDC421Axxx differs from the CDC421xxx in the following ways:

• Device Startup

The CDC421Axxx has an improved startup circuit to enable correct operation for all power-supply ramp times.

• Single 3.3-V Supply
• High-Performance Clock Generator, Incorporating Crystal Oscillator Circuitry with Integrated Frequency Synthesizer
• Low Output Jitter: As low as 380 fs (RMS integrated between 10 kHz to 20 MHz)
• Low Phase Noise at 312.5 MHz:
  • Less than -120 dBc/Hz at 10 kHz and -147 dBc/Hz at 10-MHz offset from carrier
• Supports Crystal or LVCMOS Input Frequencies at 31.25 MHz, 33.33 MHz, and 35.42 MHz
• Output Frequencies: 100 MHz, 106.25 MHz, 125 MHz, 156.25 MHz, 212.5 MHz, 250 MHz, and 312.5 MHz
• Differential Low-Voltage Positive Emitter Coupled Logic (LVPECL) Outputs
• Fully-Integrated Voltage-Controlled Oscillator (VCO): Runs from 1.75 GHz to 2.35 GHz
• Typical Power Consumption: 300 mW
• Chip Enable Control Pin
• Available in 4-mm × 4-mm QFN-24 Package
• ESD Protection Exceeds 2 kV (HBM)
• Industrial Temperature Range: -40°C to +85°C
• APPLICATIONS
  • Low-Cost, Low-Jitter Frequency Multiplier

All trademarks are the property of their respective owners.

• Function
• Low-jitter clock generator
• Number of outputs
• 1
• Output frequency (Max) (MHz)
• 212.5
• Core supply voltage (V)
• 3.3
• Output supply voltage (V)
• 3.3
• Input type
• LVCMOS
• Output type
• LVPECL
• Operating temperature range (C)
• -40 to 85
• Features
• Signal 3.3-V supply, Chip-enable control pin
• Rating
• Catalog

CDC421A212的完整型号有：CDC421A212RGER、CDC421A212RGET，以下是这些产品的关键参数及官网采购报价：

CDC421A212RGER，工作温度：-40 to 85，封装：VQFN (RGE)-24，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网CDC421A212RGER的批量USD价格：6.468（1000+）

CDC421A212RGET，工作温度：-40 to 85，封装：VQFN (RGE)-24，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网CDC421A212RGET的批量USD价格：7.762（1000+）

PSPICE-FOR-TI 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)