The DS92LV3241 (SER) serializes a 32-bit data bus into 2 or 4 (selectable) embedded clock LVDS serial channels for a data payload rate up to 2.72 Gbps over cables such as CATx, or backplanes FR-4 traces. The companion DS92LV3242 (DES) deserializes the 2 or 4 LVDS serial data channels, de-skews channel-to-channel delay variations and converts the LVDS data stream back into a 32-bit LVCMOS parallel data bus.

On-chip data Randomization/Scrambling and DC balance encoding and selectable serializer Pre-emphasis ensure a robust, low-EMI transmission over longer, lossy cables and backplanes. The Deserializer automatically locks to incoming data without an external reference clock or special sync patterns, providing an easy “plug-and-lock” operation.

By embedding the clock in the data payload and including signal conditioning functions, the Channel-Link II SerDes devices reduce trace count, eliminate skew issues, simplify design effort and lower cable/connector cost for a wide variety of video, control and imaging applications. A built-in AT-SPEED BIST feature validates link integrity and may be used for system diagnostics.

• Wide Operating Range Embedded Clock SER/DES
  • Up to 32-bit Parallel LVCMOS Data
  • 20 to 85 MHz Parallel Clock
  • Up to 2.72 Gbps Application Data Paylod
• Selectable Serial LVDS Bus Width
  • Dual Lane Mode (20 to 50 MHz)
  • Quad Lane Mode (40 to 85 MHz)
• Simplified Clocking Architecture
  • No Separate Serial Clock Line
  • No reference Clock Required
  • Receiver Locks to Random Data
• On-Chip Signal Conditioning for Robust Serial Connectivity
  • Transmit Pre-Emphasis
  • Data Randomization
  • DC-Balance Encoding
  • Receive Channel Deskew
  • Supports up to 10m CAT-5 at 2.7 Gbps
• Integrated LVDS Terminations
• Built-in AT-SPEED BIST for End-to-End System Testing
• AC-Coupled Interconnect for Isolation and Fault Protection
• > 4KV HBM ESD Protection
• Space-Saving 64-pin TQFP Package
• Full Industrial Temperature Range : -40° to +85°C

All trademarks are the property of their respective owners.

• Operating temperature range (C)
• -40 to 85

DS92LV3241的完整型号有：DS92LV3241TVS/NOPB、DS92LV3241TVSX/NOPB，以下是这些产品的关键参数及官网采购报价：

DS92LV3241TVS/NOPB，工作温度：-40 to 85，封装：TQFP (PAG)-64，包装数量MPQ：160个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网DS92LV3241TVS/NOPB的批量USD价格：6.97（1000+）

DS92LV3241TVSX/NOPB，工作温度：-40 to 85，封装：TQFP (PAG)-64，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网DS92LV3241TVSX/NOPB的批量USD价格：5.808（1000+）

PSPICE-FOR-TI 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)