The LM3492/-Q1 integrates a boost converter and a two-channel current regulator to implement a high efficient and cost effective LED driver for driving two individually dimmable LED strings with a maximum power of 15 W and an output voltage of up to 65 V. The boost converter employs a proprietary Projected-On-Time control method to give a fast transient response with no compensation required, and a nearly constant switching frequency programmable from 200 kHz to 1 MHz. The application circuit is stable with ceramic capacitors and produces no audible noise on dimming. The programmable peak current limit and soft-start features reduce current surges at start-up, and an integrated 190 mΩ, 3.9-A N-Channel MOSFET switch minimizes the solution size.

The fast slew rate current regulator allows high frequency and narrow pulse width dimming signals to achieve a very high contrast ratio of 1000:1 at a dimming frequency of more than 3 kHz. The LED current is programmable from 50 mA to 200 mA by a single resistor.

To maximize the efficiency, Dynamic Headroom Control (DHC) automatically adjusts the output voltage to a minimum. DHC also facilitates a single BOM for different number of LED in a string, which is required for backlight panels of different size, thereby reducing overall development time and cost. The LM3492/-Q1 comes with a versatile COMM pin which serves as a bidirectional I/O pin interfacing with an external MCU for the following functions: power-good, overtemperature, IOUT overvoltage and undervoltage indications, switching frequency tuning, and channel 1 disabling. Other supervisory functions of the LM3492/-Q1 include precise enable, VCC undervoltage lockout, current regulator over-power protection, and thermal shutdown protection. The LM3492/-Q1 is available in the thermally enhanced 20-pin HTSSOP package.

• Boost Converter:
  • LM3492-Q1 is an Automotive Grade Product That is AEC Q100 Grade 1 Qualified
  • Very Wide Input Voltage Ranged From 4.5 V to 65 V
  • Programmable Soft Start
  • No Loop Compensation Required
  • Stable With Ceramic and Other Low ESR Capacitors With No Audible Noise
  • Nearly Constant Switching Frequency Programmable From 200 kHz to 1 MHz
• Current Regulators:
  • Programmable LED Current from 50 mA to 200 mA
  • 1000:1 Contrast Ratio at a Dimming Frequency of More Than 3 kHz, Minimum LED Current Pulse Width is 300 ns
  • Two Individual Dimmable LED Strings up to 65 V, Total 15 W (Typically 28 LEDs at 150 mA)
  • Dynamic Headroom Control Maximizes Efficiency
  • Over-Power Protection
  • ±3% Current Accuracy
• Supervisory Functions:
  • Precision Enable
  • COMM I/O Pin for Diagnostic and Commands
  • Thermal Shutdown Protection
  • Thermally Enhanced 20-Pin HTSSOP package

• Number of channels (#)
• 2
• Topology
• Boost with Current Sink
• Rating
• Automotive
• Operating temperature range (C)
• -40 to 125
• Vin (Min) (V)
• 4.5
• Vin (Max) (V)
• 65
• Vout (Min) (V)
• 5
• Vout (Max) (V)
• 63
• Iout (Max) (A)
• 0.4
• Iq (Typ) (mA)
• 3.6
• Switching frequency (Max) (kHz)
• 1000
• Features
• Adjustable Switch Frequency, Enable/Shutdown, Integrated Switch, Power Good, Soft Start, Thermal Shutdown

LM3492-Q1的完整型号有：LM3492QMH/NOPB、LM3492QMHX/NOPB，以下是这些产品的关键参数及官网采购报价：

LM3492QMH/NOPB，工作温度：-40 to 125，封装：HTSSOP (PWP)-20，包装数量MPQ：73个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM3492QMH/NOPB的批量USD价格：1.936（1000+）

LM3492QMHX/NOPB，工作温度：-40 to 125，封装：HTSSOP (PWP)-20，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM3492QMHX/NOPB的批量USD价格：1.613（1000+）

LM3492AR111DEMO LM3492 AR111 LED 灯泡更换参考板

The LM3492 demonstration board included in this package is designed for converting nominal 12VAC from electronic transformer output to drive seven series connected LEDs at 360- mA average current. The end user can directly light up a LED string through the demonstration board from an electronic (...)

LM3492EVAL 用于 LED 背景照明评估板的双通道降压稳压器（具有 DHC）

The LM3492 integrates a boost converter and a two-channel current regulator to implement a high efficient and cost effective LED driver for driving two individually dimmable LED strings with a maximum power of 15W and an output voltage of up to 65V. The boost converter employs a proprietary (...)

PSPICE-FOR-TI 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)