This octal buffer/driver is designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.

The SN74ACT244 device is organized as two 4-bit buffers/drivers with separate output-enable (OE) inputs. When OE is low, the device passes noninverted data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE shall be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

• Qualified for Automotive Applications
• 4.5-V to 5.5-V VCC Operation
• Inputs Accept Voltages to 5.5 V
• Max tpd of 9 ns at 5 V
• Inputs Are TTL Compatible

• Technology Family
• ACT
• Supply voltage (Min) (V)
• 4.5
• Supply voltage (Max) (V)
• 5.5
• Number of channels (#)
• 8
• IOL (Max) (mA)
• 24
• ICC (Max) (uA)
• 40
• IOH (Max) (mA)
• -24
• Input type
• TTL-Compatible CMOS
• Output type
• 3-State
• Features
• Balanced outputs, Very high speed (tpd 5-10ns), Input clamp diode
• Rating
• Automotive

SN74ACT244-Q1的完整型号有：SN74ACT244IPWRG4Q1、SN74ACT244IPWRQ1，以下是这些产品的关键参数及官网采购报价：

SN74ACT244IPWRG4Q1，工作温度：-40 to 85，封装：TSSOP (PW)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74ACT244IPWRG4Q1的批量USD价格：.263（1000+）

SN74ACT244IPWRQ1，工作温度：-40 to 85，封装：TSSOP (PW)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网SN74ACT244IPWRQ1的批量USD价格：.234（1000+）

14-24-LOGIC-EVM 支持 14 到 24 引脚 PW、DB、D、DW、NS、DYY 和 DGV 封装的通用逻辑 EVM

该 EVM 设计用于支持采用 14 至 24 引脚 D、DW、DB、NS、PW、DYY 或 DGV 封装的任何逻辑器件。