
- 制造厂商:TI(德州仪器,Texas Instruments)
- 产品类别:逻辑和电压转换
- 技术类目:触发器、锁存器和寄存器 - D 型触发器
- 功能描述:具有三态输出的 10 位总线接口触发器
- 点击这里打开及下载SN74ALS29821的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格

These 10-bit edge-triggered D-type flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. These devices are particularly suitable for implementing wider buffer registers, I/O ports, bidirectional bus drivers with parity, and working registers.
On the positive transition of the clock (CLK) input, the Q outputs are true to the data (D) input.
A buffered output-enable (
) input can place the ten outputs in either a normal logic state (high or low logic levels) or a high-impedance state. The outputs also are in the high-impedance state during power-up and power-down conditions. The outputs remain in the high-impedance state while the device is powered down. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components.
does not affect the internal operation of the flip-flops. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.
The SN54ALS29821 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ALS29821 is characterized for operation from 0°C to 70°C.
- Functionally Equivalent to AMD's AM29821
- Provide Extra Data Width Necessary for Wider Address/Data Paths or Buses With Parity
- Outputs Have Undershoot-Protection Circuitry
- Power-Up High-Impedance State
- Buffered Control Inputs Reduce dc Loading Effects
- Package Options Include Plastic Small-Outline (DW) Packages and Standard Plastic (NT) and Ceramic (JT) 300-mil DIPs
- Number of channels (#)
- 10
- Technology Family
- ALS
- Supply voltage (Min) (V)
- 4.75
- Supply voltage (Max) (V)
- 5.25
- Input type
- Bipolar
- Output type
- 3-State
- Clock Frequency (Max) (MHz)
- 75
- IOL (Max) (mA)
- 48
- IOH (Max) (mA)
- -24
- ICC (Max) (uA)
- 115000
- Features
- High speed (tpd 10-50ns)
SN74ALS29821的完整型号有:SN74ALS29821DW,以下是这些产品的关键参数及官网采购报价:
SN74ALS29821DW,工作温度:0 to 70,封装:SOIC (DW)-24,包装数量MPQ:25个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网SN74ALS29821DW的批量USD价格:3.157(1000+)

14-24-LOGIC-EVM 支持 14 到 24 引脚 PW、DB、D、DW、NS、DYY 和 DGV 封装的通用逻辑 EVM
该 EVM 设计用于支持采用 14 至 24 引脚 D、DW、DB、NS、PW、DYY 或 DGV 封装的任何逻辑器件。


- TPS25221
- DS91D180
- TPS65980
- SN74ABT240A
- OPA2992-Q1
- LMR33620
- ADC102S021
- INA331
- INA253
- LM5101C
- TAS5720L
- TPS73801-SEP
- TPS61061
- TPA3138D2
- CSD95495QVM
- LDC1614
- OPA2277-DIE
- LMT87-Q1
- TPS3617-50
- CD4017B
- TMUX6219DGKR
- ADS8321E/2K5
- UCC3958PWP-3
- TPS2001EDBVR
- TIL3020
- LMP2232AMAX/NOPB
- LP2985AITPX-2.7/NOPB
- TL7705AIP
- ADS1220EVM
- SN74HC259ANS
- LMH6644MT
- PCM2704CDB
- TPS77133DGKR
- LM3676SDX-1.8
- TIBPAL16R8-25CFN
- UC3845DG4
- TM4C1237E6PZI
- VSP2590ZWVR
- SM320VC5416GGU16EP
- OPA836IRUNR

