This 1-bit to 4-bit address driver is designed for 1.65-V to 3.6-V V_CC operation.

The SN74ALVCH16344 is used in applications in which four separate memory locations must be addressed by a single address.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

• Member of the Texas Instruments Widebus Family
• Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
• Latch-Up Performance Exceeds 250 mA Per JESD 17
• ESD Protection Exceeds JESD 22
  • 2000-V Human-Body Model (A114-A)
  • 200-V Machine Model (A115-A)

Widebus is a trademark of Texas Instruments.

• Technology Family
• ALVC
• Supply voltage (Min) (V)
• 1.65
• Supply voltage (Max) (V)
• 3.6
• Number of channels (#)
• 8
• IOL (Max) (mA)
• 24
• ICC (Max) (uA)
• 40
• IOH (Max) (mA)
• -24
• Input type
• Standard CMOS
• Output type
• 3-State
• Features
• Balanced outputs, Very high speed (tpd 5-10ns), Over-voltage tolerant inputs, Damping resistors, Bus-hold
• Rating
• Catalog

SN74ALVCH16344的完整型号有：SN74ALVCH16344DGGR、SN74ALVCH16344DL，以下是这些产品的关键参数及官网采购报价：

SN74ALVCH16344DGGR，工作温度：-40 to 85，封装：TSSOP (DGG)-56，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74ALVCH16344DGGR的批量USD价格：1.879（1000+）

SN74ALVCH16344DL，工作温度：-40 to 85，封装：SSOP (DL)-56，包装数量MPQ：20个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74ALVCH16344DL的批量USD价格：1.879（1000+）