
- 制造厂商:TI(德州仪器,Texas Instruments)
- 产品类别:逻辑和电压转换
- 技术类目:触发器、锁存器和寄存器 - D 型触发器
- 功能描述:具有双路输出和三态输出的 3.3V 10 位触发器
- 点击这里打开及下载SN74ALVCH16820的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格

This 10-bit flip-flop is designed for 1.65-V to 3.6-V VCC operation.
The flip-flops of the SN74ALVCH16820 are edge-triggered D-type flip-flops. On the positive transition of the clock (CLK) input, the device provides true data at the Q outputs.
A buffered output-enable (OE)\ input can be used to place the ten outputs in either a normal logic state (high or low logic level) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without need for interface or pullup components.
OE\ input does not affect the internal operation of the flip-flops. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Active bus-hold circuitry is provided to hold unused or undriven inputs at a valid logic level. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.
- Member of the Texas Instruments Widebus Family
- Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
- Latch-Up Performance Exceeds 250 mA Per JESD 17
- ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
Widebus is a trademark of Texas Instruments.
- Number of channels (#)
- 10
- Technology Family
- ALVC
- Supply voltage (Min) (V)
- 1.65
- Supply voltage (Max) (V)
- 3.6
- Input type
- Standard CMOS
- Output type
- 3-State
- Clock Frequency (Max) (MHz)
- 150
- IOL (Max) (mA)
- 24
- IOH (Max) (mA)
- -24
- ICC (Max) (uA)
- 40
- Features
- Balanced outputs, Very high speed (tpd 5-10ns), Over-voltage tolerant inputs, Bus-hold
SN74ALVCH16820的完整型号有:SN74ALVCH16820DGGR,以下是这些产品的关键参数及官网采购报价:
SN74ALVCH16820DGGR,工作温度:-40 to 85,封装:TSSOP (DGG)-56,包装数量MPQ:2000个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网SN74ALVCH16820DGGR的批量USD价格:1.685(1000+)


- TLV9062-Q1
- TPS63050
- LMK04806
- LM46001-Q1
- TS3USB31E
- MSP430G2131
- CD74HC4015
- DRV2603
- SN74ALVC16244A
- DRV8302
- SN65LVDS95-Q1
- MSP430G2533
- SN54AS1000A
- OPA3692
- TPS54331-Q1
- SN54BCT244
- MSP430FR59941
- REF2041
- SN74LVC541A
- SN74HCT540
- TPS92601BQPWPRQ1
- OPA703NA/3K
- TL431BCLPM
- TL431AQDCKT
- BQ2054SN
- LAUNCHCC3235MOD
- TLV62595DMQR
- LMV601MG/NOPB
- UC2907N
- TMAG5173D2QDBVRQ1
- LM2902DG4
- ADS5424IPGPR
- CD74HCT652M
- LP2960AIM-3.3/NOPB
- 74ALVTH16245VRG4
- SN65HVD1792DR
- TLV3202AQDGKRQ1
- LM4862MX/NOPB
- CD74HC4051M96
- SN65LVDS32NSR

