The SN74AUP1T00 performs the Boolean function Y = A • B or Y = A + B with designation for logic-level translation applications with output referenced to supply V_CC.

AUP technology is the industry’s lowest-power logic technology designed for use in extending battery-life in operating. All input levels that accept 1.8-V LVCMOS signals, while operating from either a single 3.3-V or 2.5-V V_CC supply. This product also maintains excellent signal integrity (see Figure 1 and Figure 2).

The wide V_CC range of 2.3 V to 3.6 V allows the possibility of switching output level to connect to external controllers or processors.

Schmitt-trigger inputs (V_T = 210 mV between positive and negative input transitions) offer improved noise immunity during switching transitions, which is especially useful on analog mixed-mode designs. Schmitt-trigger inputs reject input noise, ensure integrity of output signals, and allow for slow input signal transition.

I_off is a feature that allows for powered-down conditions (V_CC = 0 V) and is important in portable and mobile applications. When V_CC = 0 V, signals in the range from 0 V to 3.6 V can be applied to the inputs and outputs of the device. No damage occurs to the device under these conditions.

The SN74AUP1T00 is designed with optimized current-drive capability of 4 mA to reduce line reflections, overshoot, and undershoot caused by high-drive outputs.

• Single-Supply Voltage Translator
• Output Level Up to Supply VCC CMOS Level
  • 1.8 V to 3.3 V (at VCC = 3.3 V)
  • 2.5 V to 3.3 V (at VCC = 3.3 V)
  • 1.8 V to 2.5 V (at VCC = 2.5 V)
  • 3.3 V to 2.5 V (at VCC = 2.5 V
• Schmitt-Trigger Inputs Reject Input Noise and Provide Better Output Signal Integrity
• Ioff Supports Partial Power Down (VCC = 0 V)
• Very Low Static Power Consumption: 0.1 A
• Very Low Dynamic Power Consumption: 0.9 A
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• Pb-Free Packages Available: SC-70 (DCK) 2 × 2.1 × 0.65 mm (Height 1.1 mm)
• More Gate Options Available at www.ti.com/littlelogic
• ESD Performance Tested Per JESD 22
  • 2000-V Human-Body Model (A114-B, Class II)
  • 1000-V Charged-Device Model (C101)

• Technology Family
• AUP1T
• Bits (#)
• 1
• High input voltage (Min) (Vih)
• 1.35
• High input voltage (Max) (Vih)
• 3.6
• Vout (Min) (V)
• 2.3
• Vout (Max) (V)
• 3.6
• IOH (Max) (mA)
• -4
• IOL (Max) (mA)
• 4

SN74AUP1T00的完整型号有：SN74AUP1T00DCKR，以下是这些产品的关键参数及官网采购报价：

SN74AUP1T00DCKR，工作温度：-40 to 85，封装：SC70 (DCK)-5，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74AUP1T00DCKR的批量USD价格：.065（1000+）

5-8-LOGIC-EVM 支持 5 至 8 引脚 DCK、DCT、DCU、DRL 和 DBV 封装的通用逻辑 EVM

灵活的 EVM 设计用于支持具有 5 至 8 引脚数且采用 DCK、DCT、DCU、DRL 或 DBV 封装的任何器件。

TIDA-010050 适用于 AMR 的超低功耗水流测量参考设计

此参考设计经过全面测试，展示了一个通过机械流量计对水流进行电子测量的低功耗解决方案，并提供了用于水流测量和无线通信的单芯片平台。该设计非常适用于水表自动抄表 (AMR) 模块，该模块可在现有机械流量计上添加无线通信功能。射频子系统支持无线 M-Bus 等标准协议或低于 1GHz ISM 频带的专有协议。此参考设计可提供远距离精确读取机械旋转量的能力，并提供更高的可靠性。超低的功耗可降低对电池的要求并延长产品寿命。