
- 制造厂商:TI(德州仪器,Texas Instruments)
- 产品类别:逻辑和电压转换
- 技术类目:触发器、锁存器和寄存器 - D 型触发器
- 功能描述:增强型产品单路正边沿触发式 D 型触发器
- 点击这里打开及下载SN74LVC1G79-EP的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格

This single positive-edge-triggered D-type flip-flop is designed for 1.65-V to 5.5-V VCC operation.
When data at the data (D) input meets the setup time requirement, the data is transferred to the Q output on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the level at the output.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
- Supports 5-V VCC Operation
- Inputs Accept Voltages to 5.5 V
- Max tpd of 5 ns at 3.3 V
- Low Power Consumption, 10-A Max ICC
- ±24-mA Output Drive at 3.3 V
- Ioff Supports Partial-Power-Down Mode Operation
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)
- SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
- Controlled Baseline
- One Assembly/Test Site
- One Fabrication Site
- Available in Military (55°C/125°C) Temperature Range(1)
- Extended Product Life Cycle
- Extended Product-Change Notification
- Product Traceability
(1) Additional temperature ranges are available - contact factory.
- Number of channels (#)
- 1
- Technology Family
- LVC
- Supply voltage (Min) (V)
- 1.65
- Supply voltage (Max) (V)
- 5.5
- Input type
- Standard CMOS
- Output type
- Push-Pull
- Clock Frequency (Max) (MHz)
- 150
- IOL (Max) (mA)
- 32
- IOH (Max) (mA)
- -32
- ICC (Max) (uA)
- 10
- Features
- Balanced outputs
SN74LVC1G79-EP的完整型号有:SN74LVC1G79WDCKREP、V62/05621-01XE,以下是这些产品的关键参数及官网采购报价:
SN74LVC1G79WDCKREP,工作温度:-55 to 115,封装:SC70 (DCK)-5,包装数量MPQ:3000个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网SN74LVC1G79WDCKREP的批量USD价格:.649(1000+)
V62/05621-01XE,工作温度:-55 to 115,封装:SC70 (DCK)-5,包装数量MPQ:3000个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网V62/05621-01XE的批量USD价格:.649(1000+)


- CC2564C
- DSLVDS1001
- SN74AHCT125-Q1
- OPA2171-EP
- DLP3310
- LM7171
- MSP430F6775A
- TL3845B
- BQ21061
- DAC81408
- SN74ALVC00-EP
- SN74LVC2G126
- DAC8571
- TMS320C6748
- DRV134
- LMV321A
- LM5109A
- SN54ALS133
- TM4C123BE6PM
- TPS7A85A
- ISO7731FQDWRQ1
- ISO7710FQDQ1
- OPA4131PA
- SN74LVT16373DL
- TPS565208DDCT
- LM331N/NOPB
- SN74AHCT138NG4
- TRS202EIPWR
- LM12H458CIV/NOPB
- LP3991TL-1.5/NOPB
- TPS562243DRLR
- TPS2113APW
- LP2954IMX/NOPB
- OMAP3525ECBC
- LM380N
- AWR6443ABGABLQ1
- MAX3232CDRG4
- PCF8574APWRE4
- CD4048BNSRE4
- TPS7A4450DGQR

