The THS4513 is a wideband, fully differential op amp designed for 3.3 V to 5 V data-acquisition systems. It has very low noise at 2.2 nV/ load. Slew rate is very high at 5100 V/µs and with settling time of 5.5 ns to 1% (2 V step), it is ideal for pulsed applications. It is suitable for minimum gain of 6 dB.

To allow for dc coupling to ADCs, its unique output common-mode control circuit maintains the output common-mode voltage within 5 mV offset (typ) from the set voltage, when set within 0.5 V of mid-supply, with less than 4 mV differential offset voltage. The common-mode set point is set to mid-supply by internal circuitry, which may be over-driven from an external source.

The input and output are optimized for best performance with their common-mode voltages set to mid-supply. Along with high performance at low power supply voltage, this makes for extremely high performance single supply 5 V data acquisition systems.

The THS4513 is offered in a 16-pin ceramic flatpack package (W), and is characterized for operation over the full military temperature range from -55°C to 125°C.

• Fully Differential Architecture
• Centered Input Common-Mode Range
• Minimum Gain of 2V/V (6 dB)
• Bandwidth: 1100 MHz (Gain = 6 dB)
• Slew Rate: 5100 V/μs
• 1% Settling Time: 5.5 ns
• HD2: -76 dBc at 70 MHz
• HD3: -88 dBc at 70 MHz
• OIP2: 84 dBm at 70 MHz
• OIP3: 42 dBm at 70 MHz
• Input Voltage Noise: 2.2 nV/Hz (f >10 MHz)
• Noise Figure: 19.8 dB
• Output Common-Mode Control
• Power Supply:
  • Voltage: 3 V (±1.5 V) to 5 V (±2.5 V)
  • Current: 37.7 mA
• Power-Down Capability: 0.65 mA
• Rad-Tolerant: 150 kRad (Si) TID
• QML-V Qualified, SMD 5962-07223
• APPLICATIONS
  • 5 V Data-Acquisition Systems
  • High-Linearity ADC Amplifier
  • Wireless Communication
  • Medical Imaging
  • Test and Measurement

• Number of channels (#)
• 1
• Total supply voltage (Min) (+5V=5, +/-5V=10)
• 3
• Total supply voltage (Max) (+5V=5, +/-5V=10)
• 5.5
• BW @ Acl (MHz)
• 1100
• Acl, min spec gain (V/V)
• 1
• Slew rate (Typ) (V/us)
• 5100
• Architecture
• Fully Differential ADC Driver, Bipolar
• Vn at flatband (Typ) (nV/rtHz)
• 2.2
• Iq per channel (Typ) (mA)
• 37.7
• Rail-to-rail
• No
• Vos (offset voltage @ 25 C) (Max) (mV)
• 4
• Operating temperature range (C)
• -55 to 125, 25 to 25
• Approx. price (US$)
• 943.95 | 1ku
• Output current (Typ) (mA)
• 96
• 2nd harmonic (dBc)
• 106
• 3rd harmonic (dBc)
• 108
• @ MHz
• 10
• GBW (Typ) (MHz)
• 3000
• Input bias current (Max) (pA)
• 15500000
• Features
• Shutdown
• CMRR (Typ) (dB)
• 90
• Rating
• Space

THS4513-SP的完整型号有：5962-0722301VFA、THS4513HKT/EM，以下是这些产品的关键参数及官网采购报价：

5962-0722301VFA，工作温度：-55 to 125，封装：CFP (HKT)-16，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：Call TI，TI官网5962-0722301VFA的批量USD价格：943.95（1000+）

THS4513HKT/EM，工作温度：25 to 25，封装：CFP (HKT)-16，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：Call TI，TI官网THS4513HKT/EM的批量USD价格：325（1000+）

THS4513EVM — THS4513 evaluation module

THS4513EVM is an evaluation Module for the RGT (16 pin leadless QFN) package.

The THS4513EVM is designed to demonstrate the functionality and versatility of the device. The EVM is ready for power, signal source, and test instruments. The EVM is configured for a gain of 0dB and 50 ohm input and (...)

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)