TLK1002A is a single-chip dual signal conditioning transceiver.

This chip supports data rates from 1.0 Gbps up to 1.3 Gbps. An on-chip clock generation phase-locked loop (PLL) generates the required half-rate clock from an externally applied reference clock. This reference clock equals approximately one tenth of the data rate. It may be off frequency from both received data streams by up to ±200 ppm.

Both data paths are implemented identical. The implemented input buffers provide an input sensitivity of 400 mVp-p differential.

The data paths tolerate up to 0.606 UI total input jitter. Signal retiming is performed by means of phase-locked loop (PLL) circuits. The retimed output signals are fed to VML output buffers, which provide output amplitudes of typical 1600mVp-p differential across the external 2x50 load.

TLK1002A only requires a single 1.8 V supply voltage. Robust design avoids the necessity of special off-chip supply filtering.

Advanced low power CMOS design leads to low power consumption.

• Fully Integrated Signal Conditioning Transceiver
• 1.0-1.3 Gbps Operation
• Low Power CMOS Design (<300 mW)
• High Differential Output Voltage Swing (1600 mVp-p typical)
• 400 mVp-p Differential Input Sensitivity
• High Input Jitter Tolerance 0.606 UI
• Single 1.8 V Power Supply
• 2.5 V Tolerant Control Inputs
• Differential VML Transmit Outputs With No External Components Necessary
• No External Filter Components Required for PLLs
• Supports Loop-Back Modes
• Temperature Rating 0°C to 70°C
• Small Footprint 4 mm × 4 mm 24-Lead QFN Package
• APPLICATIONS
  • Resynchronization in Both Directions for 1.25 Gbps Links
  • Repeater for 1.0625 Gbps Applications

• Type
• Retimer
• Number of channels (#)
• 2
• Input compatibility
• CMOS
• Speed (Max) (Gbps)
• 1.3
• Protocols
• Telecom SerDes
• Operating temperature range (C)
• 0 to 70

TLK1002A的完整型号有：TLK1002ARGET，以下是这些产品的关键参数及官网采购报价：

TLK1002ARGET，工作温度：0 to 70，封装：VQFN (RGE)-24，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TLK1002ARGET的批量USD价格：7.5（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)