The TMP9A00-EP device is a CMOS, precision analog output temperature sensor available in a tiny 5-pin SC70 package. The TMP9A00-EP operates from –55 °C to 150 °C on a supply voltage of 1.8 V to 5.5 V with a supply current of 4 µA. Operation as low as 1.8 V is possible for temperatures between 15 °C and 150 °C. The linear transfer function has a slope of –11.77 mV/°C (typical) and an output voltage of 1.8639 V (typical) at 0 °C. The TMP9A00-EP has a ±2.5 °C accuracy a from –55 °C to 130 °C and ±3.5 °C from 130 °C to 150 °C.

The 4-µA (maximum) supply current of the TMP9A00-EP limits self-heating of the device to less than 0.01 °C. When V+ is less than 0.5 V, the device is in shutdown mode and consumes less than 20 nA (typical).

The TMP9A00-EP is available in a 5-pin SC70 package that reduces the overall required board space.

• ±2.5 °C Accuracy from 55 °C to +130 °C
• ±3.5 °C Accuracy from 55 °C to +150 °C
• Supply voltage range: 1.8 V to 5.5 V
• Low power: 4 A (maximum)
• Microsize package: SC70
• Supports defense, aerospace, and medical applications
  • Controlled baseline
  • One assembly/test site
  • One fabrication site
  • Extended product life cycle
  • Extended product-change notification
  • Product traceability

• Local sensor accuracy (Max) (+/- C)
• 2.5
• Operating temperature range (C)
• -55 to 150
• Supply voltage (Min) (V)
• 2.7
• Supply voltage (Max) (V)
• 5.5
• Supply current (Max) (uA)
• 4
• Interface type
• Analog output
• Sensor gain (mV/Deg C)
• -11.77
• Rating
• HiRel Enhanced Product
• Features
• Industry standard pinout

TMP9A00-EP的完整型号有：TMP9A00MDCKREP、TMP9A00MDCKTEP，以下是这些产品的关键参数及官网采购报价：

TMP9A00MDCKREP，工作温度：-55 to 150，封装：SC70 (DCK)-5，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TMP9A00MDCKREP的批量USD价格：1.8（1000+）

TMP9A00MDCKTEP，工作温度：-55 to 150，封装：SC70 (DCK)-5，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TMP9A00MDCKTEP的批量USD价格：2.16（1000+）

TMP9A00-EP-EVM 适用于 TMP9A00-EP 低功耗精密模拟温度传感器的评估模块

TMP9A00-EP-EVM 采用适用于控制和数据记录的 USB 接口，并具有一个板载 MSP430F5528 微控制器，可连接主机计算机和 TMP9A00-EP 器件的模拟接口。传感器可与电路板的主要部分分离，从而允许 TMP9A00-EP 远离主机。