The TPS2811 dual high-speed MOSFET driver is capable of delivering peak currents of 2 A into highly capacitive loads. This performance is achieved with a design that inherently minimizes shoot-through current and consumes an order of magnitude less supply current than competitive products.

The TPS2811 driver include a regulator to allow operation with supply inputs between 14 V and 40 V. The regulator output can power other circuitry, provided power dissipation does not exceed package limitations. When the regulator is not required, REG_IN and REG_OUT can be left disconnected or both can be connected to V_CC or GND.

TPS2811 driver is available in an 8-pin TSSOP package and operates over a ambient temperature range of −40°C to 125°C.

• Qualified for Automotive Applications
• Industry-Standard Driver Replacement
• 25-ns Max Rise/Fall Times and 40-ns Max Propagation Delay With 1-nF Load, VCC = 14 V
• 2-A Peak Output Current, VCC = 14 V
• 5-A Supply Current With Input High or Low
• 4-V to 14-V Supply-Voltage Range; Internal Regulator Extends Range to 40 V
• 40°C to 125°C Ambient-Temperature Operating Range

• Number of channels (#)
• 2
• Power switch
• MOSFET
• Peak output current (A)
• 2
• Input VCC (Min) (V)
• 4
• Input VCC (Max) (V)
• 14
• Features
• Internal Regulator
• Operating temperature range (C)
• -40 to 125
• Rise time (ns)
• 14
• Fall time (ns)
• 15
• Prop delay (ns)
• 25
• Input threshold
• CMOS
• Channel input logic
• Inverting
• Input negative voltage (V)
• 0
• Rating
• Automotive
• Driver configuration
• Dual

TPS2811-Q1的完整型号有：TPS2811QPWRQ1，以下是这些产品的关键参数及官网采购报价：

TPS2811QPWRQ1，工作温度：-40 to 125，封装：TSSOP (PW)-8，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TPS2811QPWRQ1的批量USD价格：1.298（1000+）

TPS2811 PSpice Transient Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)