The TPS6226x device is a highly efficient synchronous step-down DC/DC converter. The TPS6226x provides up to 600-mA output current from a single Li-Ion cell, and is ideal for battery-powered applications such as mobile phones and other portable equipment.

With an wide input voltage range of 2 V to 6 V, the device also supports two- and three-cell alkaline batteries, 3.3-V and 5-V input voltage rails.

The TPS6226x operates at 2.25-MHz fixed-switching frequency, and enters power save mode operation at light load currents to maintain high efficiency over the entire load current range.

The power save mode is optimized for low-output voltage ripple. For low noise applications, the device can be forced into fixed frequency pulse-width modulation (PWM) mode by pulling the MODE pin high. In the shutdown mode, the current consumption is reduced to less than 1 µA. The TPS6226x allows the use of small inductors and capacitors to achieve a small solution size.

The TPS6226x operates over a free air temperature range of –40°C to 85°C. It is available in a 5-pin SOT and a 6-pin 2-mm × 2-mm WSON package.

• High Efficiency Step-Down Converter
• Output Current up to 600 mA
• VIN Range from 2 V to 6 V for Li-ion Batteries with Extended Voltage Range
• 2.25-MHz Fixed Frequency Operation
• Power Save Mode at Light Load Currents
• Output Voltage Accuracy in PWM Mode ±1.5%
• Typical 15-A Quiescent Current
• 100% Duty Cycle for Lowest Dropout
• Voltage Positioning at Light Loads
• Available in a SOT (5) and 2-mm × 2-mm × 0.8- mm WSON (6) Package
• Allows <1-mm Solution Height
• APPLICATIONS
  • Mobile Phones, Smart Phones
  • Low Power DSP Supply
  • Portable Media Players
  • Point-of-Load (POL) Applications

All other trademarks are the property of their respective owners

• Vin (Min) (V)
• 2
• Vin (Max) (V)
• 6
• Vout (Min) (V)
• 1.8
• Vout (Max) (V)
• 1.8
• Iout (Max) (A)
• 0.6
• Iq (Typ) (uA)
• 15
• Switching frequency (Min) (kHz)
• 2000
• Switching frequency (Max) (kHz)
• 2500
• Features
• Enable, Forced PWM, Light Load Efficiency, Synchronous Rectification
• Rating
• Catalog
• Regulated outputs (#)
• 1
• Control mode
• Voltage Mode
• Duty cycle (Max) (%)
• 100

TPS62261的完整型号有：TPS62261DRVR、TPS62261DRVT，以下是这些产品的关键参数及官网采购报价：

TPS62261DRVR，工作温度：-40 to 85，封装：WSON (DRV)-6，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS62261DRVR的批量USD价格：.487（1000+）

TPS62261DRVT，工作温度：-40 to 85，封装：WSON (DRV)-6，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS62261DRVT的批量USD价格：.584（1000+）

TPS62260EVM-229 TPS62260 6V 输入、1.2V 输出、0.6A 评估模块

The TPS62260EVM-229 facilitates evaluation of the TPS62260 2.25MHz, 600mA step-down converter in 2x2SON/TSOT-23 package.

TPS62261 Unencrypted PSpice Transient Model Package (Rev. A)

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)