The TS3USB30 is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (955 MHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps).

• VCC Operation at 3 V and 4.3 V
• 1.8-V Compatible Control-Pin Inputs
• IOFF Supports Partial Power-Down-Mode Operation
• Ron = 10 Ω Maximum
• ΔRon <0.35 Ω Typical
• Cio(ON) = 7 pF Typical
• Low Power Consumption (1 A Maximum)
• ESD Performance Tested Per JESD 22
  • 6000-V Human Body Model (HBM) (A114-B, Class II)
  • 1000-V Charged-Device Model (C101)
  • 250-V Machine Model (A115-A)
• 3-dB Bandwidth = 955 MHz Typical
• Packaged in 10-pin UQFN (1.4 mm × 1.8 mm)

• Protocols
• USB 2.0
• Configuration
• 2:1 SPDT
• Number of channels (#)
• 2
• Bandwidth (MHz)
• 955
• Supply voltage (Max) (V)
• 4.3
• Supply voltage (Min) (V)
• 3
• Ron (Typ) (Ohms)
• 6
• Input/ouput voltage (Min) (V)
• 0
• Input/ouput voltage (Max) (V)
• 4.3
• Supply current (Typ) (uA)
• 1
• ESD HBM (Typ) (kV)
• 6
• Operating temperature range (C)
• -40 to 85
• Crosstalk (dB)
• -56
• ESD CDM (kV)
• 1
• ICC (Typ) (uA)
• 1
• Input/output continuous current (Max) (mA)
• 64
• COFF (Typ) (pF)
• 2
• CON (Typ) (pF)
• 7
• Off isolation (Typ) (dB)
• -39
• OFF-state leakage current (Max) (A)
• 2
• Propagation delay (ns)
• 0.25
• Ron (Max) (Ohms)
• 10
• Ron channel match (Max) (Ohms)
• 0.35
• RON flatness (Typ) (Ohms)
• 2
• Turn off time (disable) (Max) (ns)
• 25
• Turn on time (enable) (Max) (ns)
• 30
• VIH (Min) (V)
• 1.3
• VIL (Max) (V)
• 0.7

TS3USB30的完整型号有：TS3USB30RSWR，以下是这些产品的关键参数及官网采购报价：

TS3USB30RSWR，工作温度：-40 to 85，封装：UQFN (RSW)-10，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TS3USB30RSWR的批量USD价格：.633（1000+）