The UC1710 family of FET drivers is made with a high-speed Schottky process to interface between low-level control functions and very high-power switching devices-particularly power MOSFET\x92s. These devices accept low-current digital inputs to activate a high-current, totem pole output which can source or sink a minimum of 6A.

Supply voltages for both V_IN and V_C can independently range from 4.7V to 18V. These devices also feature under-voltage lockout with hysteresis.

The UC1710 is packaged in an 8-pin hermetically sealed dual in-line package for \x9655°C to +125°C operation. The UC2710 and UC3710 are specified for a temperature range of \x9640°C to +85°C and 0°C to +70°C respectively and are available in either an 8-pin plastic dual in-line or a 5-pin, TO-220 package. Surface mount devices are also available.

• Totem Pole Output with 6A Source/Sink Drive
• 3ns Delay
• 20ns Rise and Fall Time into 2.2nF
• 8ns Rise and Fall Time into 30nF
• 4.7V to 18V Operation
• Inverting and Non-Inverting Outputs
• Under-Voltage Lockout with Hysteresis
• Thermal Shutdown Protection
• MINIDIP and Power Packages

• Number of channels (#)
• 1
• Power switch
• MOSFET, IGBT
• Peak output current (A)
• 6
• Input VCC (Min) (V)
• 4.7
• Input VCC (Max) (V)
• 18
• Features
• Thermal Shutdown
• Operating temperature range (C)
• -55 to 125
• Rise time (ns)
• 25
• Fall time (ns)
• 20
• Prop delay (ns)
• 35
• Input threshold
• CMOS
• Channel input logic
• Inverting, Non-Inverting
• Input negative voltage (V)
• 0
• Rating
• Space
• Driver configuration
• Complementary

UC1710-SP的完整型号有：5962-0152001VPA，以下是这些产品的关键参数及官网采购报价：

5962-0152001VPA，工作温度：-55 to 125，封装：CDIP (JG)-8，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网5962-0152001VPA的批量USD价格：204.058（1000+）

PSPICE-FOR-TI 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)