The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6 µs.

The MSP430FE42x2 devices are microcontroller configurations with two independent 16-bit sigma-delta analog-to-digital (A/D) converters and embedded signal processor core used to measure and calculate single-phase energy in both 2-wire and 3-wire configurations. Also included is a built-in 16-bit timer, 128 LCD segment drive capability, and 14 I/O pins.

Typical applications include 2-wire and 3-wire single-phase metering.

• Low Supply-Voltage Range, 2.7 V to 3.6 V
• Ultra-Low-Power Consumption:
  • Active Mode: 400 A at 1 MHz, 3.0 V
  • Standby Mode: 1.6 A
  • Off Mode (RAM Retention): 0.1 A
• Five Power-Saving Modes
• Wake-Up From Standby Mode in Less Than 6 s
• Frequency-Locked Loop, FLL+
• 16-Bit RISC Architecture, 125-ns Instruction Cycle Time
• Embedded Signal Processing for Single-Phase Energy Metering With Integrated Analog Front-End and Temperature Sensor (ESP430CE1B)
• 16-Bit Timer_A With Three Capture/Compare Registers
• Integrated LCD Driver for 128 Segments
• Serial Communication Interface (USART), Asynchronous UART, or Synchronous SPI Selectable by Software
• Brownout Detector
• Supply Voltage Supervisor/Monitor With Programmable Level Detection
• Serial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security Fuse
• Bootstrap Loader in Flash Devices
• Family Members Include:
  • MSP430FE4232 8KB + 256B Flash Memory, 256B RAM
  • MSP430FE4242 12KB + 256B Flash Memory, 512B RAM
  • MSP430FE4252 16KB + 256B Flash Memory, 512B RAM
  • MSP430FE4272 32KB + 256B Flash Memory, 1KB RAM
• Available in 64-Pin Quad Flat Pack (QFP)
• For Complete Module Descriptions, See the MSP430x4xx Family User’s Guide, Literature Number SLAU056

• Non-volatile memory (kB)
• 8
• RAM (KB)
• 0.25
• ADC
• 16-bit Sigma Delta
• GPIO pins (#)
• 14
• Features
• Advanced sensing, LCD
• UART
• 1
• USB
• No
• Number of I2Cs
• 0
• SPI
• 1
• Comparator channels (#)
• 0

MSP430FE4232的完整型号有：MSP430FE4232IPM、MSP430FE4232IPMR，以下是这些产品的关键参数及官网采购报价：

MSP430FE4232IPM，工作温度：-40 to 85，封装：LQFP (PM)-64，包装数量MPQ：160个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网MSP430FE4232IPM的批量USD价格：2.578（1000+）

MSP430FE4232IPMR，工作温度：-40 to 85，封装：LQFP (PM)-64，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网MSP430FE4232IPMR的批量USD价格：2.148（1000+）

MSP-FET MSP430 闪存仿真工具

MSP-GANG MSP-GANG 生产编程器

MSP-GRLIB — MSP 图形库

MSP-DSPLIB — MSP 微控制器的数字信号处理 (DSP) 库

MSP430WARE — 适用于 MSP430 微控制器的 MSPWare

UNIFLASH — 适用于大多数 TI 微控制器 (MCU) 和毫米波传感器的 UniFlash

MSP-FLASHER — 适用于 MSP430 和 SimpleLink MSP432 MCU 的命令行编程器

CCSTUDIO — Code Composer Studio 集成式开发环境 (IDE)

CCSTUDIO-MSP 适用于 MSP 微控制器的 Code Composer Studio (CCS) 集成开发环境 (IDE)

ENERGYTRACE EnergyTrace 技术

IAR-KICKSTART IAR Embedded Workbench

MSP430x41x, MSP430F42x Code Examples (Rev. P)

MSP-3P-SEARCH MSP Third party search tool

MSP430 schematic symbols and footprints library for use with the Eagle CAD tool (Rev. E)