This 1-bit to 2-bit address driver is designed for 2.3-V to 3.6-V V_CC operation.

Diodes to V_CC have been added on the inputs to clamp overshoot.

Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

The outputs, which are designed to sink up to 12 mA, include equivalent 26- series resistors to reduce overshoot and undershoot.

To ensure the high-impedance state during power up or power down, the output-enable (OE)\ input should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

• Member of the Texas Instruments Widebus Family
• Output Ports Have Equivalent 26- Series Resistors, So No External Resistors Are Required
• Diodes on Inputs Clamp Overshoot
• Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
• Latch-Up Performance Exceeds 250 mA Per JESD 17
• ESD Protection Exceeds JESD 22
  • 2000-V Human-Body Model (A114-A)
  • 200-V Machine Model (A115-A)

Widebus is a trademark of Texas Instruments.

• Technology Family
• ALVC
• Supply voltage (Min) (V)
• 2.3
• Supply voltage (Max) (V)
• 3.6
• Number of channels (#)
• 18
• IOL (Max) (mA)
• 12
• ICC (Max) (uA)
• 40
• IOH (Max) (mA)
• -12
• Input type
• Standard CMOS
• Output type
• 3-State
• Features
• Balanced outputs, Very high speed (tpd 5-10ns), Input clamp diode, Damping resistors, Bus-hold
• Rating
• Catalog

SN74ALVCHS162830的完整型号有：SN74ALVCHS162830GR，以下是这些产品的关键参数及官网采购报价：

SN74ALVCHS162830GR，工作温度：-40 to 85，封装：TSSOP (DBB)-80，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74ALVCHS162830GR的批量USD价格：2.05（1000+）