SN74AUC16240_TI 具有三态输出的 16 通道、0.8V 至 2.7V 高速反相器

SN74AUC16240的基本参数

制造厂商：TI（德州仪器，Texas Instruments）
产品类别：逻辑和电压转换
技术类目：缓冲器、驱动器和收发器 - 反向缓冲器和驱动器
功能描述：具有三态输出的 16 通道、0.8V 至 2.7V 高速反相器
点击这里打开及下载SN74AUC16240的技术文档资料
TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格

SN74AUC16240的产品详情：

This 16-bit buffer/driver is operational at 0.8-V to 2.7-V V_CC, but is designed specifically for 1.65-V to 1.95-V V_CC operation.

The SN74AUC16240 is designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.

The device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. It provides inverting outputs and symmetrical active-low output-enable (OE)\ inputs.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

This device is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74AUC16240的优势和特性：

Member of the Texas Instruments Widebus Family
Optimized for 1.8-V Operation and is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation
Ioff Supports Partial-Power-Down Mode Operation
Sub 1-V Operable
Max tpd of 2 ns at 1.8 V
Low Power Consumption, 20-uA Max ICC
±8-mA Output Drive at 1.8 V
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)

Widebus is a trademark of Texas Instruments.

SN74AUC16240的参数（英文）：

Technology Family
AUC
Supply voltage (Min) (V)
0.8
Supply voltage (Max) (V)
2.7
Number of channels (#)
16
IOL (Max) (mA)
9
IOH (Max) (mA)
-9
ICC (Max) (uA)
20
Input type
Standard CMOS
Output type
3-State
Features
Balanced outputs, Ultra high speed (tpd <5ns), Partial power down (Ioff), Over-voltage tolerant inputs
Rating
Catalog

SN74AUC16240具体的完整产品型号参数及价格（美元）：

SN74AUC16240的完整型号有：SN74AUC16240DGGR、SN74AUC16240DGVR，以下是这些产品的关键参数及官网采购报价：

SN74AUC16240DGGR，工作温度：-40 to 85，封装：TSSOP (DGG)-48，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74AUC16240DGGR的批量USD价格：.968（1000+）

SN74AUC16240DGVR，工作温度：-40 to 85，封装：TVSOP (DGV)-48，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74AUC16240DGVR的批量USD价格：.968（1000+）

SN74AUC16240的评估套件：

SN74AUC16240的电路图解：

SN74AUC16240的评估套件：