The TPS6512x DC-DC converter supplies all three voltages required by amorphous-silicon (a-Si) and low-temperature poly-silicon (LTPS) TFT-LCD displays. The compact layout of the TPS6512x uses a single inductor to generate independently-regulated positive and negative outputs. A free-running variable peak current PWM control scheme time-multiplexes the inductor between outputs. This control architecture operates at a pseudo-fixed-frequency to provide fast response to line and load transients while maintaining a relatively constant switching frequency and high efficiency over a wide range of input and output voltages. Due to the high switching frequency capability of the device, inexpensive and ultra-thin 8.2 or 10 µH inductors can be used.

The main output, V_MAIN, is post-regulated to provide a low-ripple source drive voltage for the LCD display. The auxiliary outputs generate a boosted output voltage, V_GH, up to 20 V, and a negative output voltage, V_GL, down to -18 V for the LCD gate drive. The device has internal current limiting for high reliability under fault conditions. Additionally, the device offers a fixed output linear regulator for the LCD logic circuitry.

• Main Output, VMAIN
  • Adjustable Voltage, 3.0 V to 5.6 V/25 mA
  • Post-Regulated for Low Ripple (5mVPP)
  • ±0.8% Typical Accuracy
  • Efficiency up to 83%
• Positive Output, VGH
  • Adjustable Voltage up to 20 V/2 mA
  • ±3% Typical Accuracy
• Negative Output, VGL
  • Adjustable Voltage down to -18 V/2 mA
  • ±3% Typical Accuracy
• Auxiliary 1.8 V/3.3 V Linear Regulator
• Automatic or Programmable Power Sequencing
• Complete 1 mm Component Profile Solution
• 2.5 V to 5.5 V Input Voltage Range
• Output Short Circuit Protected
• 16-Pin QFN Package (3 × 3 × 0,9 mm)
• APPLICATIONS
  • Small Form Factor a-Si and LTPS TFT LCD
  • Cell Phones, Smart Phones
  • PDAs, Pocket PCs
  • Portable DVD
  • Digital-Still Cameras, Camcorders
  • Handheld Instruments
  • Portable GPS
  • Car Navigation Systems

• Display type
• LCD unipolar
• IC integration
• LCD bias
• Vin (Min) (V)
• 2.5
• Vin (Max) (V)
• 5.5
• Source driver voltage (Min) (V)
• 3
• Source driver voltage (Max) (V)
• 5.6
• Level shifter/scan driver (ch)
• 0
• V_POS (Min) (V)
• 3
• V_POS (Max) (V)
• 20
• V_NEG (Min) (V)
• -18
• V_NEG (Max) (V)
• -1.5
• Features
• Output discharge
• Topology
• Boost, Inverting Buck-Boost
• Rating
• Catalog

TPS65121的完整型号有：TPS65121RGTR，以下是这些产品的关键参数及官网采购报价：

TPS65121RGTR，工作温度：-40 to 85，封装：VQFN (RGT)-16，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS65121RGTR的批量USD价格：.966（1000+）

TPS65120EVM-076 TPS65120 评估模块

The TPS65120EVM-076 is an evaluation tool for the TPS65120 multi-channel power supply for small form-factor TFT LCD displays. The evaluation module can accept input voltages in range of 2.5V to 5.5V and supplies Vmain = 5V, Vgh = 12V and Vgl = -12V to power a-Si or LTPS TFT displays. Other voltages (...)

TPS65124EVM-076 TPS65124 评估模块

The TPS65124EVM-076 is an evaluation tool for the TPS65124 multi-channel power supply for small form-factor TFT LCD displays. The evaluation module can accept input voltages in range of 2.5V to 5.5V and supplies Vmain = 5V, Vgh = 12V and Vgl = -12V to power a-Si or LTPS TFT displays. Other voltages (...)

PSPICE-FOR-TI 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)