The UCC39421 family of synchronous PWM controllers is optimized to operate from dual alkaline/NiCd cells or a single Lithium-Ion (Li-Ion) cell, and convert to adjustable output voltages from 2.5 V to 8 V. For applications where the input voltage does not exceed the output, a standard boost configuration is used.

For other applications where the input voltage can swing above and below the output, a 1:1 coupled inductor (Flyback or SEPIC) is used in place of the single inductor. Fixed frequency operation can be programmed, or synchronized to an external clock source. In applications where (at light loads) variable frequency mode is acceptable, the IC can be programmed to automatically enter PFM (pulse frequency modulation) mode for an additional efficiency benefit.

Synchronous rectification provides excellent efficiency at high power levels, where N- or P- type MOSFETs can be used. At lower power levels (between 10% and 20% of full load) where fixed frequency operation is required, low power mode is entered. This mode optimizes efficiency by cutting back on the gate drive of the charging FET. At very low power levels, the IC enters a variable frequency mode (PFM). PFM can be disabled by the user.

Other features include pulse-by-pulse current limiting, and a low 5-µA quiescent current during shutdown. The UCC39422 incorporates programmable power-on reset circuitry and an uncommitted comparator for low voltage detection. The available packages are 20-pin TSSOP or 20-pin N for the UCC39422, and 16-pin TSSOP or 16-pin N for the UCC39421.

• Operation Down to an Input Voltage of 1.8 V
• High Efficiency Boost, SEPIC or Flyback (Buck-Boost) Topologies
• Drives External FETs for High-Current Applications
• Up to 2-MHz Oscillator
• Synchronizable Fixed Frequency Operation
• High-Efficiency Low-Power Mode
• High-Efficiency at Very Low-Power with Programmable Variable Frequency Mode
• Pulse-by-Pulse Current Limit
• 5-μA Supply Current in Shutdown
• 150-μA Supply Current in Sleep Mode
• Selectable NMOS or PMOS Rectification
• Built-In Power-On Reset (UCC39422 Only)
• Built-In Low-Voltage Detect (UCC39422 Only)

• Vin (Min) (V)
• 1.5
• Vin (Max) (V)
• 8
• Vout (Min) (V)
• 2.5
• Vout (Max) (V)
• 8
• Regulated outputs (#)
• 1
• Switching frequency (Min) (kHz)
• 200
• Switching frequency (Max) (kHz)
• 2000
• Iq (Typ) (mA)
• 0.635
• Features
• Enable, Frequency Synchronization, Light Load Efficiency
• Duty cycle (Max) (%)
• 100
• Rating
• Catalog

UCC29421的完整型号有：UCC29421PW，以下是这些产品的关键参数及官网采购报价：

UCC29421PW，工作温度：-40 to 85，封装：TSSOP (PW)-16，包装数量MPQ：90个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网UCC29421PW的批量USD价格：3.747（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)