CD4016B Series types are quad bilateral switches intended for the transmission or multiplexing of analog or digital signals. Each of the four independent bilateral switches has a single control signal input which simultaneously biases both the p and n device in a given switch on or off.

The CD4016 "B" Series types are supplied in 14-lead hermetic dual-in-line ceramic packages (F3A suffix), 14-lead dual-in-line plastic packages (E suffix), 14-lead small-outline packages (M, MT, M96, and NSR suffixes), and 14-lead thin shrink small-outline packages (PW and PWR suffixes).

• 20-V digital or ± 10-V peak-to-peak switching
• 280- typical on-state resistance for 15-V operation
• Switch on-state resistance matched to within 10 typ. over 15-V signal-input range
• High on/off output-voltage ratio: 65 dB typ. @ fis = 10 kHz, RL = 10 k
• High degree of linearity: <0.5% distortion typ. @ fis = 1 kHz, Vis = 5 Vp-p, VDDVSS
• Extremely low off-state switch leakage resulting in very low offset current and high effective off-state resistance: 100pA typ. @ VDDVSS = 18 V, TA = 25°C
• Extremely high control input impedance (control circuit isolated form signal circuit: 1012typ.
• Low crosstalk between switches: 50 dB typ. @ fis= 0.9 MHz, RL = 1 k
• Matched control-input to signal-output capacitance: Reduces output signal transients
• Frequency response, switch on = 40MHz (typ.)
• 100% tested for quiescent current at 20 V
• Maximum control input current of 1 A at 18 V over full package temperature range; 100 nA at 18 V and 25°C
• 5-V, 10-V, and 15-V parametric ratings
• Applications:
  • Analog signal switching/multiplexing
    • Signal gating
    • Squelch control
    • Chopper
    • Modulator
    • Demodulator
    • Commutating switch
  • Digital signal switching/multiplexing
  • CMOS logic implementation
  • Analog-to-digital & digital-to-analog conversion
  • Digital control of frequency, impedance, phase, and analog-signal gain

Data sheet acquired from Harris Semiconductor

• Configuration
• 1:1 SPST
• Number of channels (#)
• 4
• Power supply voltage - single (V)
• 3.3, 5, 12, 16, 20
• Protocols
• Analog
• Ron (Typ) (Ohms)
• 280
• CON (Typ) (pF)
• 7.5
• ON-state leakage current (Max) (A)
• 0.1
• Bandwidth (MHz)
• 40
• Operating temperature range (C)
• -55 to 125
• Features
• Break-before-make
• Input/output continuous current (Max) (mA)
• 10
• Rating
• Military
• Supply current (Typ) (uA)
• 0.01

CD4016B-MIL的完整型号有：5962-9064001CA、CD4016BF、CD4016BF3A，以下是这些产品的关键参数及官网采购报价：

5962-9064001CA，工作温度：-55 to 125，封装：CDIP (J)-14，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网5962-9064001CA的批量USD价格：6.62（1000+）

CD4016BF，工作温度：-55 to 125，封装：CDIP (J)-14，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网CD4016BF的批量USD价格：6.62（1000+）

CD4016BF3A，工作温度：-55 to 125，封装：CDIP (J)-14，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网CD4016BF3A的批量USD价格：6.62（1000+）